Your shopping cart is empty!
ATP8730 High Resolution NIR spectrometer
Availability: In Stock
ATP8730 High Resolution NIR spectrometer
Download Data Sheet
Product Code: ATP8730
application
ATP8730 is an ultra-high-resolution, ultra-high-speed, short-wave infrared series micro-optic spectrometer developed by Optosky, with a maximum working range of 900-1700nm (the actual range can be customized). It adopts a 1024-pixel InGaAs array detector, and it adopts optimization. The optical path design has an amazing resolution of 30pm.
At the same time, Optosky specially customized the ultra-low noise CCD signal-related dual sampling processing circuit for ATP8730, with a minimum quantization noise of fewer than 25 counts, which greatly reduces the noise of the sensor and obtains an excellent signal-to-noise ratio (about two times higher than similar competitors), and The measurement reliability of ATP8730 is improved, and the measurement results do not change with ambient temperature.
ATP8730 can receive SMA905 fiber input light or free space light, and output the measured spectral data through the USB2.0/USB3.0 or UART port.
| Detector | |
| Detector type | linear array InGaAs CCD，Down to -20ºC |
| Effective pixels | 1024 |
| Optical parameter | |
| Max dynamic range | >1400 |
| Max wavelength range | 900-1700nm，Different ranges can be customized |
| Optical path | f/4 Asymmetric C-T optical path |
| Focal distance | 70 mm for incidence / 150 mm for output |
| Optical resolution | 30 pm ~ 2 nm （Depends on slit, spectral range） |
| Incident Interface | SMA905 Optical fiber interface, free space |
| Wavelength range | 900-1700 nm |
| Slit Size | 5、10、25、50、100、150、200 μm Optional, other sizes can be customized |
| Electrical parameter | |
| ADC depth | 16bit |
| Data output interface | USB 3.0 |
| Maximum frame rate | >30 KHz |
| Maximum working humidity | < 90%RH（No condensation） |
| Power supply | 5V DC±5% |
| Integration time | 10μs - 256s |
| Storage temperature | -30°C ~ +70°C |
| Operating temperature | -20°C ~ +45°C |
- 1024-pixel InGaAs detector;
- Ultra-high frame rate: 30 KHz;
- Maximum spectral range: 900-1700nm (customized);
- Minimum spectral resolution: 30 pm (related to the width of the incident slit);
- Integration time: 10μs - 256s;
- Power supply: DC 5V@<1A;
- Power interface: USB power supply;
- ADC depth: 16 bits;
- ADC sampling rate: 10 MHz;
- Optical input interface: SM905 optical fiber ;
- interface or free space input;
- Data output interface: USB3.0 and UART;
- 20-pin extended interface;
- Off-SMA trigger signal;
- Monitoring of the laser wavelength;
- Optical communication wavelength monitoring;
- High-speed ion luminescence monitoring;
- Food sorting, moisture, protein, fat, and fiber detection of crops;
- Paper sorting;
- Online monitoring of Chinese medicine production;
- Solar panel inspection;
What are NIR spectrometer from Optosky?
ATP8100 ultra-mini nir spectrometer
ATP8600 low cost, uncooled, FBGA, nir spectrometer, 800-1700nm
ATP8730 High resolution 0.08nm resolution, up to 30KHz frame rate
ATP8000 High performance 2-stage TEC cooled InGaAs, max, 800-2600nm, replace ocean NIR spectrometer
ATP8000T3 Highest performance 3-stage TEC cooled down to -30℃, low noise, and low dark current
