Availability: In Stock
200-1000nm, 4096pixels, High-sensitivity & High-resolution, UV-Vis Spectrometer
Download Data Sheet
Product Code: ATP5040


Request a Quote or Info
Optosky ATP5040 uses 4096pixels, other parameters almost the same as ATP5020, it employs the ultra-high performance, high-sensitivity, high-resolution, and cost-effective model. The award-winner spectrometer is called cooled Maya, it can even replace Maya and QE65 in SNR, sensitivity, and resolution. It's ideal for Raman system well. It uses, a back-thinned CCD array, TE-cooled down to -10 ℃. Sensor noise is further reduced, and SNR is almost 2 times higher than others. Increased reliability can remain measure result unchanged with temperature.

Customized design of ultra-low noise CCD signal processing circuit built inside, Noise is lower can 3 counts is ahead of records in the industries. 

ATP5040 is designed with SMA905 optic fiber entrance connector or free space, and it outputs spectral data via USB2.0/UART



Cooled down to







Performance parameters



TE-cooled, back-thinned CCD array, cooled down to-20)

Spectral range

165-1180 nm

Effective pixels

2048×64pixel, 4096×64pixel

Pixel sizes

14×14μm, 7×200μm

Full range

~200 ke-


6.5 uV/e-

Dark noise

6 e-

Optical parameters

Wavelength range

180-1180 nm


0.02-2 nm depend on slit, spectral range



Dynamic range


Operating temperature


Operating humidity

< 85%RH

Optical parameters

Optical path

f/4 crossed Czerny-Turner (C-T)


77.5 mm for incidence / 111.6 mm for  output

Entrance slit width

5102550100150200 μm (optional)

Available in customized other widths

Entrance connector

SMA905 Fiber optic connector, free space

Electrical parameters

Integration time

1 ms - 130 second

Data output port

USB 2.0

ADC in-depth

18 bit Actual output 16bit

Power supply

DC 5V±10%

Operating current


Storage temperature

-20°C to +70°C

Operating temperature

-10°C to +40°C

Physical parameters


170×110×52 mm3


1.3 kg



Detector type Back-thinned Linear array detector, TE-cooled to -10℃
Spectral range 193-1008nm
Effective pixels 4096pixels
Pixels dimension 7x200 um
Full well capacity NA
Detector model hamamtsu s13496 +TEC
Sensitivity 650 uV/e-
Dark noise 0.4mVrms
Optical parameter
Wavelength range 193-1008nm, 200-1000 nm, 200850nm, 600-1000nm, 800-1000nm
Optical resolution 5 to 200 µm
Signal-to-noise >600:1
Dynamic range 50000
Working temperature -10°c to + 50°c
Numberical aperture 0.11
Working humidity < 90% NC
Trigger YES(IN and OUT)
Cooling temperature -5°c
Scanning rate < 1 kfps
Optical configuration
Optical design f/4 crossed asymmetrical Czerny-Turner
Focal distance 40/60mm
Incident slit 50 μm (5, 10, 25, 50, 100, or 200 μm optional)
Incident Interface SMA905 connector,free space
Electrical parameter
A/D conversion resolution 18 bit
Integration time 1 ms - 80 s
Interfaces USB 2.0 (480MHz High speed)
Supply voltage DC4.5 to 5.5 V (type @5V)
Operating current <2.3A
Storage temperature -30°c to + 70 °c
Physical parameters
Dimension 170×110×52 mm^3
Weight 1.2kg
Sealing Anit-sweat

Detector:back-thinned CCD, TE-cooled down to -10 ℃

CCD parameters:4096pixels, 14×14um

Ultra-low noise CCD signal processing circuit

Spectral range: 180-1180nm

Spectral resolution: 0.01-1.3nm(depend on spectral range, slit width)

Optical path:crossed Czerny-Turner (C-T)

Integration time:1ms-130s

power supply:DC 5V±10% @ <2.3A

18 bit, 570KHz A/D Converter

Entrance connector:SMA905 connector or free space

Output interface: high-speed USB2.0 or UART

20 pins, dual rows programmable extension connector

Raman spectrometer

Micro spectrophotometer, 

high-speed spectrophotometer

Spectral analysis /radiation spectrophotometer/ spectrophotometric analysis

Transmittance, absorbance, reflectance detection

Wavelength detection


Q:What is the wavelength range?

A:ATP5040 is available in 350-800nm,200-850nm,200-1000nm,600-1000nm,800-1000nm.We also accept the specified wavelength range, please contact us if you want to know more.

Q:What is the sensitivity?

A:The sensitivity of ATP 5040 is 6.5 uV/e-.

Q:What is the resolution?

A:Resolution of ATP5040 can be customized between 0.01-1.3 nm corresponding to the different slits and spectral range.

Q:What is signal-to-noise ratio?

A:SNR of ATP5040 is   >8000:1.

Q:What brands used for the detector?

A:CCD of ATP5040 used Hamamatsu made in Japan, the best brand of CCD.

Q:What is the size?

A:It's 170mm×110mm×52mm, equal to 6.7×4.3×2 inch.

Q:What is the weight?

A:The weight is about 3.45kg.

Q:Do you have the software interface for C++?

A:ATP 5040 is equipped with SDK software for C++ development.

Q:Do you have the software interface for Matlab development?

A:Not at the moment, if the customer has a bigger volume to support development, that's fine.

Q:How long is the spectrometer warranty?

A:Leading industrial warranty is three year, and OEM project is offered a one-year warranty.

Q:What is the price?

A:ATP 5040 prices range between USD7680~8180, please contact us if you want to know it.

Write a review

Note: HTML is not translated!